The fact that many new phones come without 3.5mm earbud jacks may be making you feel pressured to join the wireless earbud revolution if you haven't already. But can anyone simply take up a set of Bluetooth earbuds and start listening to music, or is wireless audio only suitable for those with a strong technical background? The good news is that using Bluetooth earbuds is very easy. We're prepared to assist.
General Pairing Steps of Putting Wireless Earbuds in Pairing Mode
If you're unsure of how to put wireless earbuds in pairing mode, don't panic; the procedure is rather straightforward:
- Taking the earbuds out of the charging case.
- Long-pressing the power button.
- Opening the charging case.
- Taking the earbuds out of the charging case and putting them back.
- Press the charging case's pairing button.
- Pressing the earbuds' pairing button.
How to Pair Wireless Earbuds Via Bluetooth
The specific buttons you hit (and how long you press them) will change depending on the earbuds, but the procedure on how to put Bluetooth earbuds in pairing mode is always as straightforward as the following:
- First, select the Bluetooth menu from the settings menu on your phone. You should confirm that Bluetooth is turned on under the Bluetooth menu.
- Next, activate the Bluetooth pairing button on your earbuds. If you're unsure which button that is, check your handbook to see if the power button also serves as the Bluetooth button or if there is a separate Bluetooth button.
- When powered on, mostearbuds automatically enter pairing mode.
- The LEDs on the earbuds should start blinking to signal they're ready to pair with your phone or another device once you've held down the pairing button for a long enough period (often a few seconds).
- Return to your phone again, and you should see the name of your earbud listed on the same screen you used to enable Bluetooth. You should be partnered in a matter of seconds if you tap it.
- Try the entire process once more if it doesn't work the first time (though it should).
Precautions When Connecting Bluetooth Earbuds
- If your earbuds aren't included, it's because manufacturers occasionally give their items cryptic codenames, truncated nicknames, or incredibly ambiguous names that include the company name but not the product name.
- Additionally, you could notice other items that you can pair, like your computer or the phone of the person seated next to you. You won't link with certain devices if you don't tap on their names.
Recommended Wireless Earbuds
Simply start playing music once you've associated your devices. You'll be able to control the volume, track navigation, and playback directly through the earbuds. With most pairs, you can also activate voice assistants. If you don’t own your earbuds, here are some soundcore Bluetooth earbuds. They provide excellent sound quality and you can put soundcore earbuds in pairing mode easily.
Space A40
These earbuds make it simple to switch between music, calls, and other activities by simultaneously connecting to two Bluetooth devices. To keep aware of what is going on around you, you can also switch to Transparency mode. Finally, the charging case for the Space A40 wireless noise-canceling earphones supports both wireless charging and USB-C cables.
soundcore Liberty 4 Pro
The soundcore Liberty 4 Pro utilizes seven sensors to detect noise from all directions, resulting in three times stronger noise reduction. They offer hi-fi sound with rich detail, ideal for music, podcasts, and movies. The case features a touch bar that enables easy fine-tuning of noise cancellation levels. Additionally, these earbuds support super-fast charging; a five-minute recharge provides four hours of playtime.
soundcore C40i
FAQ about How to Put Earbuds in Pairing Mode
Why are my earbuds not pairing?
Pairing earbuds might fail if they are out of range or not in pairing mode. To pair earbuds successfully, ensure your earbuds are close to the device and properly set to pair by following the specific instructions for entering pairing mode, usually involving holding down a button. If pairing issues persist, a reset might be necessary.
How do you reset Bluetooth earbuds?
First, make sure that your earbuds are turned off. If they're not, press and hold the power button until they turn off. Once they're off, press and hold the power button for about 10 seconds. This will put your earbuds into "pairing mode."
Next, open the settings menu on your phone or other device and look for the "Bluetooth" option. Select it and then select your earbuds from the list of available devices. If everything goes as planned, your earbuds should now be successfully paired with your device.
How do I make my earbuds discoverable?
After inserting your earbuds, close the lid of the charging case. Open the case after 5–6 seconds have passed. The Bluetooth pairing mode will be automatically entered by the earbuds. Put them in your ears and hold both touch pads for a few seconds until pairing mode activates them if they are already attached to another device.
Conclusion
You can attempt a few solutions to get your earbuds working again if you're experiencing difficulties pairing them. You may reset Bluetooth on an Android phone by navigating to the Settings menu. Or you must restart your phone or tablet before you can unpair all of your iOS and iPad OS devices. You can also try resetting your earbuds if that doesn't work. Consider purchasing soundcore wireless earbuds if your current pair is worn out or if you haven't bought any yet because they deliver excellent performance in terms of sound quality and battery life.
