Motion X600
    $199.99

    Join our Registry, and create your own wish list for gifts now!

    Motion X600
    poster

    FAQ

    • What's in the box?
      Motion X600 Speaker
      60 cm USB-C to C Cable
      Safety Card
      Quick Start Guide

      Note: Aux cable and wall charger are not included!
    • How long does it take to charge Motion X600?
      It takes around 6 hours to charge with a certified 5V/3A wall charger.
    • How do I reset Motion X600?
      Turn on the speaker, then hold the Bluetooth button and volume up button simultaneously for 5-10 seconds to reset the speaker.
    • Is Motion X600 waterproof?
      Motion X600 supports IPX7 waterproofing, but before submerging it in water, it is necessary to ensure that the waterproof cover on the back is securely fastened.
    • Why is the power button recessed?
      The recessed design make it easy to use the button in low-light and dark environments.
    • Does Motion X600 have a built-in microphone?
      Yes.
    • Can I get stereo sound when using one Motion X600?
      Yes, you can get the stereo sound with single Motion X600 speaker. The left side plays left channel, the right side plays right channel.
    • Why is the battery life less than 12 hours?
      12-hour battery life is based on measurements taken at 1/4 power and with Bass Mode off. The actual battery life may vary depending on factors such as the type of content being played, custom EQ settings, and volume level.
    • Where can I download the soundcore app?
      Download the soundcore app from Google Play, the Apple App Store, or by scanning the QR code below, then you can experience the full range of Motion X600's features, including:

      1. Customizable EQ
      Customize the Pro EQ to get the sound you want for any style of music. You can also share your customized EQ with friends.

      2. LDAC Mode
      Use the app to switch to LDAC mode (only available on Android 8.0 and above).
    • How do I turn off Motion X600's voice prompts?
      1. Connect your device to Motion X600.
      2. Download and open the soundcore app.
      3. Press the top right corner to access more options.
      4. Turn off voice prompts.
    • How do I update Motion X600's firmware?
      1. Download the soundcore app.
      2. Pair Motion X600 with the soundcore app, then press Update Firmware.
      3. Do not use your phone while the firmware is updating, except if you've set the soundcore app to run in the background.
      4. Motion X600 will restart automatically after updating successfully.
    • Does spatial audio require a specific music format?
      No.
    • What is spatial audio and how do I turn it on?
      Spatial audio places sound all around you to create an immersive listening experience. Simply press the Spatial Audio button to turn on.
    • What is LDAC?
      LDAC is a Bluetooth encoding format that can transmit 3 times the amount of data of ordinary Bluetooth SBC.

      Note:LDAC only works on devices running Android 8.0 or above, it doesn't works on iPhone devices.
    • How do I use LDAC?
      On a device powered by Android 8.0 or above, do the following:
      1. Open the soundcore app.
      2. Go to the Settings
      3. Click on Sound Mode
      4. Select Preferred Audio Quality and switch to LDAC codec.

      Notes:
      • It takes about 10 seconds to switch audio codecs. You may be required to update the speaker's firmware if available. Do not use the app or speaker while updating.
      • LDAC provides higher quality sound but increases power consumption and reduces playtime.
      • Enable LDAC in a low-interference environment to ensure a stable Bluetooth connection.
    • Why do some devices experience interrupted sound when using the LDAC function?
      After enabling LDAC, your device will default to adaptive bit rate mode. Generally, there won't be any sound interruptions, however, if Android users turn on developer mode and select LDAC 990 kbps playback, sound may slightly cut in and out.

      If you would like to select 990 kbps LDAC, we recommend following these steps:

      1. Turn off Wi-Fi on your Android device.
      2. Turn off any extra Bluetooth and Wi-Fi devices in the room.
      3. Connect your Android device to Motion X600 via Bluetooth and switch to 990 kbps.
      4. Keep the distance between the Android device and Motion X600 within 0.5 m (1.6 ft).
      5. Play local music files.
    • How can I TWS pair two Motion X600 speakers at the same time?
      Method 1.
      1. Speaker 1 and Speaker 2: Long press the power button to start both speakers.
      2. Speaker 1: Hold the Bluetooth button until the button light flashes white.
      3. Speaker 2: Hold the Bluetooth button until the button light flashes white.
      4. Wait for a few seconds, and you will hear a sound when the two speakers have paired successfully.
      5. The master speaker is the one with the blue light.
      6. Use the master speaker to pair with your device.

      Method 2.
      1. Long press the power button to start both speakers
      2. Connect either speaker with your Bluetooth device.
      3. On both speakers, press and hold the Bluetooth button for at least 2seconds to enter TWS pairing mode.
      4. Wait for a few seconds, and you will hear a sound when the two speakers have paired successfully.

      Note: To exit TWS mode, hold the Bluetooth button for at least 2 seconds.
    • How does stereo sound work during TWS pairing?
      When you have two Motion X600 speakers paired at the same time, the master speaker supports left channel and sky channel(if the spatial audio is turned on), while the secondary speaker supports right channel and sky channel(if the spatial audio is turned on).
    • I can't detect Motion X600 via Bluetooth. What should I do?
      1. Fully charge the speaker.
      2.Turn on the speaker, then hold the Bluetooth button and volume up button simultaneously for 5-10 seconds to reset the speaker.
      3. Turn your device and your device's Bluetooth off and on.
      4. Clear all pairing records on your device.
      5. Restart your speaker and reconnect to it.
      6. Try the speaker with different devices if possible.
    • How do I use the EQ?
      Open the soundcore app and go to Equalizer > Custom > Full-Band. Then click any dot to expand the corresponding frequency band, long press the dot and drag to customize the frequency.
    • Can I increase the bass on my Motion X600?
      You can download the soundcore app and pair the speaker with soundcore app to enhance the bass via the EQ. The audio source quality might also affect the performance of the bass. Try using high-quality audio files or streaming services.
    • How can I share a custom EQ?
      1. Download the soundcore app.
      2. Pair Motion X600 with the soundcore app.
      3. Click Equalizer.
      4. Click the share button in the upper right corner, then click Copy Link or QR Code. You can choose an app to share the link or the QR Code with your friends.

      Note: To use the sharing function, you need to log in to your soundcore account first.
    • How do I import a custom EQ that someone has shared with me?
      Method 1: Copy the Link (Note: The link must be the EQ link of Motion X600 generated in the soundcore App)
      Open the soundcore app and pair with Motion X600, then copy the EQ link, the link will automatically be detected and you will be asked whether or not your want to import it.
      Click "Yes" and then click "Import".

      Method 2: Scan the QR Code
      Open the soundcore app and pair with Motion X600.
      Go to Equalizer > Add > Scan Code for EQ. Then scan the QR code your friend shared with you and click "Import".
    • QSG

      A3130-QSG

      2023-05-08

    • Manual

      A3130-Manual

      2023-05-08

      • What's in the box?
        Motion X600 Speaker
        60 cm USB-C to C Cable
        Safety Card
        Quick Start Guide

        Note: Aux cable and wall charger are not included!
      • How long does it take to charge Motion X600?
        It takes around 6 hours to charge with a certified 5V/3A wall charger.
      • How do I reset Motion X600?
        Turn on the speaker, then hold the Bluetooth button and volume up button simultaneously for 5-10 seconds to reset the speaker.
      • Is Motion X600 waterproof?
        Motion X600 supports IPX7 waterproofing, but before submerging it in water, it is necessary to ensure that the waterproof cover on the back is securely fastened.
      • Why is the power button recessed?
        The recessed design make it easy to use the button in low-light and dark environments.
      • Does Motion X600 have a built-in microphone?
        Yes.
      • Can I get stereo sound when using one Motion X600?
        Yes, you can get the stereo sound with single Motion X600 speaker. The left side plays left channel, the right side plays right channel.
      • Why is the battery life less than 12 hours?
        12-hour battery life is based on measurements taken at 1/4 power and with Bass Mode off. The actual battery life may vary depending on factors such as the type of content being played, custom EQ settings, and volume level.
      • Where can I download the soundcore app?
        Download the soundcore app from Google Play, the Apple App Store, or by scanning the QR code below, then you can experience the full range of Motion X600's features, including:

        1. Customizable EQ
        Customize the Pro EQ to get the sound you want for any style of music. You can also share your customized EQ with friends.

        2. LDAC Mode
        Use the app to switch to LDAC mode (only available on Android 8.0 and above).
      • How do I turn off Motion X600's voice prompts?
        1. Connect your device to Motion X600.
        2. Download and open the soundcore app.
        3. Press the top right corner to access more options.
        4. Turn off voice prompts.
      • How do I update Motion X600's firmware?
        1. Download the soundcore app.
        2. Pair Motion X600 with the soundcore app, then press Update Firmware.
        3. Do not use your phone while the firmware is updating, except if you've set the soundcore app to run in the background.
        4. Motion X600 will restart automatically after updating successfully.
      • Does spatial audio require a specific music format?
        No.
      • What is spatial audio and how do I turn it on?
        Spatial audio places sound all around you to create an immersive listening experience. Simply press the Spatial Audio button to turn on.
      • What is LDAC?
        LDAC is a Bluetooth encoding format that can transmit 3 times the amount of data of ordinary Bluetooth SBC.

        Note:LDAC only works on devices running Android 8.0 or above, it doesn't works on iPhone devices.
      • How do I use LDAC?
        On a device powered by Android 8.0 or above, do the following:
        1. Open the soundcore app.
        2. Go to the Settings
        3. Click on Sound Mode
        4. Select Preferred Audio Quality and switch to LDAC codec.

        Notes:
        • It takes about 10 seconds to switch audio codecs. You may be required to update the speaker's firmware if available. Do not use the app or speaker while updating.
        • LDAC provides higher quality sound but increases power consumption and reduces playtime.
        • Enable LDAC in a low-interference environment to ensure a stable Bluetooth connection.
      • Why do some devices experience interrupted sound when using the LDAC function?
        After enabling LDAC, your device will default to adaptive bit rate mode. Generally, there won't be any sound interruptions, however, if Android users turn on developer mode and select LDAC 990 kbps playback, sound may slightly cut in and out.

        If you would like to select 990 kbps LDAC, we recommend following these steps:

        1. Turn off Wi-Fi on your Android device.
        2. Turn off any extra Bluetooth and Wi-Fi devices in the room.
        3. Connect your Android device to Motion X600 via Bluetooth and switch to 990 kbps.
        4. Keep the distance between the Android device and Motion X600 within 0.5 m (1.6 ft).
        5. Play local music files.
      • How can I TWS pair two Motion X600 speakers at the same time?
        Method 1.
        1. Speaker 1 and Speaker 2: Long press the power button to start both speakers.
        2. Speaker 1: Hold the Bluetooth button until the button light flashes white.
        3. Speaker 2: Hold the Bluetooth button until the button light flashes white.
        4. Wait for a few seconds, and you will hear a sound when the two speakers have paired successfully.
        5. The master speaker is the one with the blue light.
        6. Use the master speaker to pair with your device.

        Method 2.
        1. Long press the power button to start both speakers
        2. Connect either speaker with your Bluetooth device.
        3. On both speakers, press and hold the Bluetooth button for at least 2seconds to enter TWS pairing mode.
        4. Wait for a few seconds, and you will hear a sound when the two speakers have paired successfully.

        Note: To exit TWS mode, hold the Bluetooth button for at least 2 seconds.
      • How does stereo sound work during TWS pairing?
        When you have two Motion X600 speakers paired at the same time, the master speaker supports left channel and sky channel(if the spatial audio is turned on), while the secondary speaker supports right channel and sky channel(if the spatial audio is turned on).
      • I can't detect Motion X600 via Bluetooth. What should I do?
        1. Fully charge the speaker.
        2.Turn on the speaker, then hold the Bluetooth button and volume up button simultaneously for 5-10 seconds to reset the speaker.
        3. Turn your device and your device's Bluetooth off and on.
        4. Clear all pairing records on your device.
        5. Restart your speaker and reconnect to it.
        6. Try the speaker with different devices if possible.
      • How do I use the EQ?
        Open the soundcore app and go to Equalizer > Custom > Full-Band. Then click any dot to expand the corresponding frequency band, long press the dot and drag to customize the frequency.
      • Can I increase the bass on my Motion X600?
        You can download the soundcore app and pair the speaker with soundcore app to enhance the bass via the EQ. The audio source quality might also affect the performance of the bass. Try using high-quality audio files or streaming services.
      • How can I share a custom EQ?
        1. Download the soundcore app.
        2. Pair Motion X600 with the soundcore app.
        3. Click Equalizer.
        4. Click the share button in the upper right corner, then click Copy Link or QR Code. You can choose an app to share the link or the QR Code with your friends.

        Note: To use the sharing function, you need to log in to your soundcore account first.
      • How do I import a custom EQ that someone has shared with me?
        Method 1: Copy the Link (Note: The link must be the EQ link of Motion X600 generated in the soundcore App)
        Open the soundcore app and pair with Motion X600, then copy the EQ link, the link will automatically be detected and you will be asked whether or not your want to import it.
        Click "Yes" and then click "Import".

        Method 2: Scan the QR Code
        Open the soundcore app and pair with Motion X600.
        Go to Equalizer > Add > Scan Code for EQ. Then scan the QR code your friend shared with you and click "Import".
      • QSG

        A3130-QSG

        2023-05-08

      • Manual

        A3130-Manual

        2023-05-08

    Customer Reviews

    Based on 35 reviews
    89%
    (31)
    11%
    (4)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    S
    Steve d
    Unbelievable sound

    I recently purchased a Bose Soundlink Flex portable speaker. I thought it sounded really good and then I came across the X600. Honestly, I never heard of this brand and was hesitant at first but decided I can always return it if I have to. This is the best portable speaker I’ve ever heard in my life. It has blown me away. The sound quality if fantastic and the power is unbelievable!!!! I placed it on a shelf on the other side of my living room and turn the volume up halfway and it blows you out of the room. Buy this speaker, if you want great sound quality and tremendous room filling sound. The Bose has been returned!!!

    C
    Customer
    Surprising sound

    I have bluetooth speakers that are louder, but this thing sounds great. I'm using a S21 Ultra and the sound is amazingly clean and crisp with my music app (Poweramp) and simply superb with Amazon Music (especially the Atmos and 360 tracks. You'll need to piddle around with your EQ a bit, but once you get it tuned in the X600 will not disappoint. You may need to adjust the EQ based on speaker placement. If it is placed in a corner the bass may need to be lowered (it thumps for such a small speaker). If SoundCore has another coupon offer I may get a second one. I'd venture a guess that the sound would be phenomenal with a pair.

    W
    Wesley B
    Excellent sounding Bluetooth speaker

    I received my X600 a few days ago and it sounds very nice, crisp highs, cool spatial audio and decent lows for its size. I wish the handle was removable so it can be used as a desktop speaker in front of my monitor, but it's not a big issue.

    Note: The LDAC is marketed as a great feature, but so far in my testing, I see that when its enabled, the Bluetooth range is greatly affected, I couldn't take my phone more than 20 feet away without it cutting out and I have not yet noticed any difference in sound quality with it on or off.

    E
    Eric
    Love my sound core.

    I love the sound core that I ordered I love the bass on it and I can feel the bass hitting on the table and bench I fully charge it yesterday and I play it at 12 pm until 8 pm and it still going and the charger light didn’t came on yet. The only I did not like that it did not came with wall charger and aux cable. It came with the usb-c to c cable. So I call the sound core company and ask them about the wall charger and aux cable they told me that I have to buy it from Best Buy or same club. So now I have to take my sound core speaker with me to Best Buy to see and find aux cable and wall charger to fit my sound core. They should of included the aux cable and wall charger in box already when they made the sound core so that we won’t have hard time of finding the right aux cable and wall charger to fit the soundcore speaker.

    J
    Jim Trzpit
    Way better than I thought it would be...

    I've been using several different brands over the past few years...always looking for something that I thought sounded good to me. I decided to give the Motion X600 a try. WOW! First impression was the packaging was great. Very sturdy and well protected...I know...most people don't worry about the box, but it says a lot when the company goes the extra mile and it shows here. The speaker looks fantastic, very sleek and stylish. Buttons are well laid out. This thing has some heft when lifting it out of the box. You can tell it's well made. It connected to my Google Pixel 7 Pro immediatley and automatically sent me to the Play store to download the app. The app is great...the included equalizer comes with several preloaded set ups....but they are very flat to my liking. But, you can customize the EQ till your heart is content and save them. The sound quality is incredible! I was amazed with the bass quality...then I turned on the bass enhancer and was blown away. Very deep bass with no distortion at all. This thing gets pretty loud too....again with no distortion or clipping out. You can also set up the speaker to use LDAC coding for bluetooth with a quick update..it allows for 3 times the amount of data of regular bluetooth. I could keep going on about this speaker....but in the end all I can say is I am extremely pleased with this purchase and have finally found the sound I've been looking for in a portable speaker. Five stars all day long!!!