Motion 300 | Portable Bluetooth Speaker
$79.99

Join our Registry, and create your own wish list for gifts now!

Motion 300 | Portable Bluetooth Speaker

Unboxing and Reviews

Listen to what these YouTubers had to say about Motion 300.
image
play
avatar

New Stuff TV

148K subscribers
image
play
avatar

TechMagnet

447k subscribers
image
play
avatar

Smart Home Sounds

103k subscribers
image
play
avatar

Patrick Rambles

119k subscribers

FAQ

  • What's in the box?
    Motion 300 Speaker
    60 cm USB-C to C Cable
    Safety Card&Quick Start Guide

    Note: Wall charger not included.
  • Does Motion 300 support AUX input?
    No
  • Can Motion 300 partycast pair with other model speakers, such as the Motion+ speaker?
    No, however, Motion 300 can pair with another Motion 300 speaker via TWS.
  • What's the playtime of Motion 300?
    13-hour battery life is based on measurements taken at 50% volume and with Bass Mode off. The actual
    battery life may vary depending on factors such as the type of content being played, custom EQ settings,
    and volume level.
  • Is Motion 300 waterproof?
    Motion 300 supports IPX7 waterproofing, but before submerging it in water, it is necessary to ensure that
    the waterproof cover is sealed tightly.
  • How long does it take to charge Motion 300?
    It takes around 4 hours to charge with a certified 5V/3A (15W) wall charger.
  • What does the power indicator light on Motion 300 look like when charging?
    When charging, the power indicator light stays red. When fully charged, it stays white.
  • Why is the power button recessed?
    The recessed design make it easy to use the button in low-light and dark environments.
  • How many speakers does Motion 300 have?
    Motion 300 has two 15W full-range speakers.
  • What is the output power of Motion 300?
    30W
  • How do I reset Motion 300?
    Turn on the speaker then hold down the "Bluetooth" and "Volume +" buttons for 5- 10 seconds. You'll hear a
    prompt and the speaker will automatically restart.
  • Does Motion 300 have a built-in microphone?
    Yes. Motion 300 is equipped with a microphone, located on the top left.
  • What Bluetooth version does Motion 300 use?
    Bluetooth 5.3.
  • Which Bluetooth codecs does Motion 300 support?
    Motion 300 supports LDAC, SBC, and MPEG2 AAC LC Bluetooth codecs.
  • How can I extend Motion 300's battery life?
    Here are some tips on how to improve battery life:
    1. Do not completely discharge the battery before recharging.
    2. Recharge the battery as soon as possible when the low-battery indicator is on.
    3. Stop charging once the battery is fully charged (to minimize recharging cycles).
    4. Do not expose the speaker to harsh environments with extremely hot or cold temperatures.
    5. Recharge the speaker regularly (once every 3 months) if it has not been used for a prolonged period.
  • How do I update Motion 300's firmware?
    1. Open the soundcore app and go to 'Update Firmware'.
    2. Do not use your phone while the firmware is updating, except if you've set the soundcore app to run in
    the background.
    3. Motion 300 will restart automatically after updating.
  • What is SmartTune?
    The speaker can recognize its own position (such as standing, lying, hanging), and automatically change
    the EQ to deliver the best possible sound for that situation.
  • What does Hi-Res mean?
    Hi-Res is an abbreviation for High Resolution Audio, which is an audio format with superior sound quality
    that retains more audio detail. Hi-Res allows you to better enjoy music with Motion 300.
  • What is LDAC? Why don't I see the LDAC option?
    LDAC is a Bluetooth encoding format that can transmit 3 times the amount of data of the ordinary SBC
    Bluetooth codec.

    Note: LDAC only works on devices running Android 8.0 or above; it does not work on iPhone.
  • Does the LDAC mode affect Bluetooth connectivity?
    LDAC affecting Bluetooth performance is a common issue. However, as long as there is little interference
    around and the Bluetooth device is not far from the speaker, Bluetooth should work properly.
  • What is TWS function and does Motion 300 support it?
    TWS stands for True Wireless Stereo, and it allows two identicial speakers to play stereo sound after
    pairing up. Motion 300 supports TWS.
  • How can I pair two Motion 300 speakers at the same time via TWS?
    Method 1
    1. Speaker 1 and Speaker 2: Long press the power button to turn on both speakers.
    2. Speaker 1: Hold the Bluetooth button until the button light flashes white.
    3. Speaker 2: Hold the Bluetooth button until the button light flashes white.
    4. Wait for a few seconds, and you will hear a sound when the two speakers have paired successfully.
    5. The primary speaker is the one with the blue light.
    6. Use the primary speaker to pair with your device.

    Method 2
    1. Long press the power button to turn on both speakers.
    2. Connect either speaker with your Bluetooth device.
    3. On both speakers, press and hold the Bluetooth button for at least 2 seconds to enter TWS pairing mode.
    4. Wait for a few seconds, and you will hear a sound when the two speakers have paired successfully.
  • Manual

    A3135-Manual

    2023-10-19

  • Declaration of Conformity

    A3135-DOC

    2023-11-07

    • What's in the box?
      Motion 300 Speaker 60 cm USB-C to C Cable Safety Card&Quick Start Guide Note: Wall charger not included.
    • Does Motion 300 support AUX input?
      No
    • Can Motion 300 partycast pair with other model speakers, such as the Motion+ speaker?
      No, however, Motion 300 can pair with another Motion 300 speaker via TWS.
    • What's the playtime of Motion 300?
      13-hour battery life is based on measurements taken at 50% volume and with Bass Mode off. The actual battery life may vary depending on factors such as the type of content being played, custom EQ settings, and volume level.
    • Is Motion 300 waterproof?
      Motion 300 supports IPX7 waterproofing, but before submerging it in water, it is necessary to ensure that the waterproof cover is sealed tightly.
    • How long does it take to charge Motion 300?
      It takes around 4 hours to charge with a certified 5V/3A (15W) wall charger.
    • What does the power indicator light on Motion 300 look like when charging?
      When charging, the power indicator light stays red. When fully charged, it stays white.
    • Why is the power button recessed?
      The recessed design make it easy to use the button in low-light and dark environments.
    • How many speakers does Motion 300 have?
      Motion 300 has two 15W full-range speakers.
    • What is the output power of Motion 300?
      30W
    • How do I reset Motion 300?
      Turn on the speaker then hold down the "Bluetooth" and "Volume +" buttons for 5- 10 seconds. You'll hear a prompt and the speaker will automatically restart.
    • Does Motion 300 have a built-in microphone?
      Yes. Motion 300 is equipped with a microphone, located on the top left.
    • What Bluetooth version does Motion 300 use?
      Bluetooth 5.3.
    • Which Bluetooth codecs does Motion 300 support?
      Motion 300 supports LDAC, SBC, and MPEG2 AAC LC Bluetooth codecs.
    • How can I extend Motion 300's battery life?
      Here are some tips on how to improve battery life: 1. Do not completely discharge the battery before recharging. 2. Recharge the battery as soon as possible when the low-battery indicator is on. 3. Stop charging once the battery is fully charged (to minimize recharging cycles). 4. Do not expose the speaker to harsh environments with extremely hot or cold temperatures. 5. Recharge the speaker regularly (once every 3 months) if it has not been used for a prolonged period.
    • How do I update Motion 300's firmware?
      1. Open the soundcore app and go to 'Update Firmware'. 2. Do not use your phone while the firmware is updating, except if you've set the soundcore app to run in the background. 3. Motion 300 will restart automatically after updating.
    • What is SmartTune?
      The speaker can recognize its own position (such as standing, lying, hanging), and automatically change the EQ to deliver the best possible sound for that situation.
    • What does Hi-Res mean?
      Hi-Res is an abbreviation for High Resolution Audio, which is an audio format with superior sound quality that retains more audio detail. Hi-Res allows you to better enjoy music with Motion 300.
    • What is LDAC? Why don't I see the LDAC option?
      LDAC is a Bluetooth encoding format that can transmit 3 times the amount of data of the ordinary SBC Bluetooth codec. Note: LDAC only works on devices running Android 8.0 or above; it does not work on iPhone.
    • Does the LDAC mode affect Bluetooth connectivity?
      LDAC affecting Bluetooth performance is a common issue. However, as long as there is little interference around and the Bluetooth device is not far from the speaker, Bluetooth should work properly.
    • What is TWS function and does Motion 300 support it?
      TWS stands for True Wireless Stereo, and it allows two identicial speakers to play stereo sound after pairing up. Motion 300 supports TWS.
    • How can I pair two Motion 300 speakers at the same time via TWS?
      Method 1 1. Speaker 1 and Speaker 2: Long press the power button to turn on both speakers. 2. Speaker 1: Hold the Bluetooth button until the button light flashes white. 3. Speaker 2: Hold the Bluetooth button until the button light flashes white. 4. Wait for a few seconds, and you will hear a sound when the two speakers have paired successfully. 5. The primary speaker is the one with the blue light. 6. Use the primary speaker to pair with your device. Method 2 1. Long press the power button to turn on both speakers. 2. Connect either speaker with your Bluetooth device. 3. On both speakers, press and hold the Bluetooth button for at least 2 seconds to enter TWS pairing mode. 4. Wait for a few seconds, and you will hear a sound when the two speakers have paired successfully.
    • Manual

      A3135-Manual

      2023-10-19

    • Declaration of Conformity

      A3135-DOC

      2023-11-07

  • What's in the box?
    Motion 300 Speaker
    60 cm USB-C to C Cable
    Safety Card&Quick Start Guide

    Note: Wall charger not included.
  • Does Motion 300 support AUX input?
    No
  • Can Motion 300 partycast pair with other model speakers, such as the Motion+ speaker?
    No, however, Motion 300 can pair with another Motion 300 speaker via TWS.
  • What's the playtime of Motion 300?
    13-hour battery life is based on measurements taken at 50% volume and with Bass Mode off. The actual
    battery life may vary depending on factors such as the type of content being played, custom EQ settings,
    and volume level.
  • Is Motion 300 waterproof?
    Motion 300 supports IPX7 waterproofing, but before submerging it in water, it is necessary to ensure that
    the waterproof cover is sealed tightly.
  • How long does it take to charge Motion 300?
    It takes around 4 hours to charge with a certified 5V/3A (15W) wall charger.
  • What does the power indicator light on Motion 300 look like when charging?
    When charging, the power indicator light stays red. When fully charged, it stays white.
  • Why is the power button recessed?
    The recessed design make it easy to use the button in low-light and dark environments.
  • How many speakers does Motion 300 have?
    Motion 300 has two 15W full-range speakers.
  • What is the output power of Motion 300?
    30W
  • How do I reset Motion 300?
    Turn on the speaker then hold down the "Bluetooth" and "Volume +" buttons for 5- 10 seconds. You'll hear a
    prompt and the speaker will automatically restart.
  • Does Motion 300 have a built-in microphone?
    Yes. Motion 300 is equipped with a microphone, located on the top left.
  • What Bluetooth version does Motion 300 use?
    Bluetooth 5.3.
  • Which Bluetooth codecs does Motion 300 support?
    Motion 300 supports LDAC, SBC, and MPEG2 AAC LC Bluetooth codecs.
  • How can I extend Motion 300's battery life?
    Here are some tips on how to improve battery life:
    1. Do not completely discharge the battery before recharging.
    2. Recharge the battery as soon as possible when the low-battery indicator is on.
    3. Stop charging once the battery is fully charged (to minimize recharging cycles).
    4. Do not expose the speaker to harsh environments with extremely hot or cold temperatures.
    5. Recharge the speaker regularly (once every 3 months) if it has not been used for a prolonged period.
  • How do I update Motion 300's firmware?
    1. Open the soundcore app and go to 'Update Firmware'.
    2. Do not use your phone while the firmware is updating, except if you've set the soundcore app to run in
    the background.
    3. Motion 300 will restart automatically after updating.
  • What is SmartTune?
    The speaker can recognize its own position (such as standing, lying, hanging), and automatically change
    the EQ to deliver the best possible sound for that situation.
  • What does Hi-Res mean?
    Hi-Res is an abbreviation for High Resolution Audio, which is an audio format with superior sound quality
    that retains more audio detail. Hi-Res allows you to better enjoy music with Motion 300.
  • What is LDAC? Why don't I see the LDAC option?
    LDAC is a Bluetooth encoding format that can transmit 3 times the amount of data of the ordinary SBC
    Bluetooth codec.

    Note: LDAC only works on devices running Android 8.0 or above; it does not work on iPhone.
  • Does the LDAC mode affect Bluetooth connectivity?
    LDAC affecting Bluetooth performance is a common issue. However, as long as there is little interference
    around and the Bluetooth device is not far from the speaker, Bluetooth should work properly.
  • What is TWS function and does Motion 300 support it?
    TWS stands for True Wireless Stereo, and it allows two identicial speakers to play stereo sound after
    pairing up. Motion 300 supports TWS.
  • How can I pair two Motion 300 speakers at the same time via TWS?
    Method 1
    1. Speaker 1 and Speaker 2: Long press the power button to turn on both speakers.
    2. Speaker 1: Hold the Bluetooth button until the button light flashes white.
    3. Speaker 2: Hold the Bluetooth button until the button light flashes white.
    4. Wait for a few seconds, and you will hear a sound when the two speakers have paired successfully.
    5. The primary speaker is the one with the blue light.
    6. Use the primary speaker to pair with your device.

    Method 2
    1. Long press the power button to turn on both speakers.
    2. Connect either speaker with your Bluetooth device.
    3. On both speakers, press and hold the Bluetooth button for at least 2 seconds to enter TWS pairing mode.
    4. Wait for a few seconds, and you will hear a sound when the two speakers have paired successfully.
  • Manual

    A3135-Manual

    2023-10-19

  • Declaration of Conformity

    A3135-DOC

    2023-11-07

    • What's in the box?
      Motion 300 Speaker 60 cm USB-C to C Cable Safety Card&Quick Start Guide Note: Wall charger not included.
    • Does Motion 300 support AUX input?
      No
    • Can Motion 300 partycast pair with other model speakers, such as the Motion+ speaker?
      No, however, Motion 300 can pair with another Motion 300 speaker via TWS.
    • What's the playtime of Motion 300?
      13-hour battery life is based on measurements taken at 50% volume and with Bass Mode off. The actual battery life may vary depending on factors such as the type of content being played, custom EQ settings, and volume level.
    • Is Motion 300 waterproof?
      Motion 300 supports IPX7 waterproofing, but before submerging it in water, it is necessary to ensure that the waterproof cover is sealed tightly.
    • How long does it take to charge Motion 300?
      It takes around 4 hours to charge with a certified 5V/3A (15W) wall charger.
    • What does the power indicator light on Motion 300 look like when charging?
      When charging, the power indicator light stays red. When fully charged, it stays white.
    • Why is the power button recessed?
      The recessed design make it easy to use the button in low-light and dark environments.
    • How many speakers does Motion 300 have?
      Motion 300 has two 15W full-range speakers.
    • What is the output power of Motion 300?
      30W
    • How do I reset Motion 300?
      Turn on the speaker then hold down the "Bluetooth" and "Volume +" buttons for 5- 10 seconds. You'll hear a prompt and the speaker will automatically restart.
    • Does Motion 300 have a built-in microphone?
      Yes. Motion 300 is equipped with a microphone, located on the top left.
    • What Bluetooth version does Motion 300 use?
      Bluetooth 5.3.
    • Which Bluetooth codecs does Motion 300 support?
      Motion 300 supports LDAC, SBC, and MPEG2 AAC LC Bluetooth codecs.
    • How can I extend Motion 300's battery life?
      Here are some tips on how to improve battery life: 1. Do not completely discharge the battery before recharging. 2. Recharge the battery as soon as possible when the low-battery indicator is on. 3. Stop charging once the battery is fully charged (to minimize recharging cycles). 4. Do not expose the speaker to harsh environments with extremely hot or cold temperatures. 5. Recharge the speaker regularly (once every 3 months) if it has not been used for a prolonged period.
    • How do I update Motion 300's firmware?
      1. Open the soundcore app and go to 'Update Firmware'. 2. Do not use your phone while the firmware is updating, except if you've set the soundcore app to run in the background. 3. Motion 300 will restart automatically after updating.
    • What is SmartTune?
      The speaker can recognize its own position (such as standing, lying, hanging), and automatically change the EQ to deliver the best possible sound for that situation.
    • What does Hi-Res mean?
      Hi-Res is an abbreviation for High Resolution Audio, which is an audio format with superior sound quality that retains more audio detail. Hi-Res allows you to better enjoy music with Motion 300.
    • What is LDAC? Why don't I see the LDAC option?
      LDAC is a Bluetooth encoding format that can transmit 3 times the amount of data of the ordinary SBC Bluetooth codec. Note: LDAC only works on devices running Android 8.0 or above; it does not work on iPhone.
    • Does the LDAC mode affect Bluetooth connectivity?
      LDAC affecting Bluetooth performance is a common issue. However, as long as there is little interference around and the Bluetooth device is not far from the speaker, Bluetooth should work properly.
    • What is TWS function and does Motion 300 support it?
      TWS stands for True Wireless Stereo, and it allows two identicial speakers to play stereo sound after pairing up. Motion 300 supports TWS.
    • How can I pair two Motion 300 speakers at the same time via TWS?
      Method 1 1. Speaker 1 and Speaker 2: Long press the power button to turn on both speakers. 2. Speaker 1: Hold the Bluetooth button until the button light flashes white. 3. Speaker 2: Hold the Bluetooth button until the button light flashes white. 4. Wait for a few seconds, and you will hear a sound when the two speakers have paired successfully. 5. The primary speaker is the one with the blue light. 6. Use the primary speaker to pair with your device. Method 2 1. Long press the power button to turn on both speakers. 2. Connect either speaker with your Bluetooth device. 3. On both speakers, press and hold the Bluetooth button for at least 2 seconds to enter TWS pairing mode. 4. Wait for a few seconds, and you will hear a sound when the two speakers have paired successfully.
    • Manual

      A3135-Manual

      2023-10-19

    • Declaration of Conformity

      A3135-DOC

      2023-11-07

Customer Reviews

Based on 5 reviews
60%
(3)
40%
(2)
0%
(0)
0%
(0)
0%
(0)
W
Wise Owl
Great little speaker

When it comes to speakers of this size it's hard to beat although it's not my top pick. If you like stereo sound with great mids and highs then look no further. It beats my other speakers shown in that area. Overall I prefer my jbl flip 6 the most due to its bass output even if it is just mono. The bose soundlink flex also has better bass, but anemic mids and okay highs from its mono speaker make it my least favorite. The tribit maxsound plus I would say is just a step below the 300 with slightly better bass.All in all it's a great little speaker that comes with the best eq and app of any bluetooth speaker brand so you can fine tune it to your preference. Just don't expect big bass from this little speaker.

J
JUNIOR
Sounds and bass

I just opened the BoxRight out the box it's already charged at 65% this has to be the BEST TOP OF THE TOP SOUND QUALITY. well made TYE design its TOP notch. Hands down this is my new work speaker. Take to the beach or on vacation pool side. The price it's also worthy I had bought speaker for 300 dollars that don't even come close to the sound and the power this small speaker provides. I'm impressed well done to the team that design this speaker. Will recommend this to anyone. Friends and Coworkers.

8
8bitmuch
Decent sound in a portable package.

It did leave me a little disappointed coming from the soundcore x600, but that's twice the speaker at around twice the price. I also found it lacking compared to the soundcore motion +, but that comes in a bigger package and is less portable.This speaker is fantastic for it's size, you have to realize your compromising the audio quality for that a little bit. While my mp3s didn't sound very good on it, lossless audio sounds absolutely fantastic. The vocals and instruments sound absolutely phenomenal, dare I say better than the x600. The piano and drum sounds felt so alive! I was really blown away. I found the sub-bass very lacking, with bass boosted on everything is drowned out, unlike the soundcore x600 which I think sounds pretty balanced with the bass boost (I'm a bass head though)If you are more interested in watching TV or media with this, this might be the speaker for you (if the battery life is good enough, need to test more for that.)I love the little strap, the test of time will see how rugged that is, but that was the main selling point for me. I tugged pretty hard on it and it didn't break, hopefully it has metal under the plastic. It's light (enough) and fits on a backpack from stock.Had to take a star off for the lack of an aux port, it deserves 3 stars for that, but for my uses I won't really be needing it. That being said I can't support such a backwards decision in anyway. Also, Anker has the worst aux ports I've ever used. My motion + aux port broke until I reset the software (....what?), My soundcore x600 aux port would cut out making PC use impossible without Bluetooth. So while I don't support the removal instead of improval, I could relate to an excuse they would make.Overall I don't regret this purchase and I love this portable speaker. If you don't plan on traveling with the speaker a lot and portability isn't key, I would recommend the soundcore x600, the mini upward firing speaker similar to Dolby Atmos is amazing, really let's the base shine without drowning out highs and mids.The soundcore motion plus is the best all around speaker from soundcore, which was very well designed and stands the test of time (the battery is a joke though, they could have doubled or even quadrupled the battery life while only making the speaker a little bit bigger.

M
Marc

spectacular sound for a sub $100 unit, almost tempted to get another for stereo pairing!!

C
CL

I first ordered the 200 and noticed some sound quality issues. Returned the motion 200 and got the motion 300 instead for $30 more dollars. It was worth it. Audio sounds as good as my JBL flip 5, and the bass is even better than the flip 5. The battery life seems good as well.

You may also like

Sign In to Receive
the Coupon Below
*Sorry, your account contains sensitive data. Please verify your account by email. Send again Send again in seconds
Register
Already signed up? Sign in Now
Sign In to soundcore
Quick Sign In
Sign In with Password
or
Please try again in 10 minutes.
A verification email has been sent to your email address, please check it.
We've Sent You a Verification Email
Please check the verification email sent to

You have to verify your account before using it.

The verification link is valid for the next 30 minutes.

There may be a few minutes of delay.

You can set your password in the My Account section.

You can use the email verification link to sign into the website each time.

Didn't receive a verification email? Send again Send again in seconds
Go Back
OK
Sign In to soundcore
Email address
Password
Forget password?
Send again Send again in seconds
or
Please try again in 10 minutes.
A verification email has been sent to your email address, please check it.
We've Sent You a Verification Email
Please check the verification email sent to

You have to verify your account before using it.

The verification link is valid for the next 30 minutes.

There may be a few minutes of delay.

You can set your password in the My Account section.

You can use the email verification link to sign into the website each time.

Didn't receive a verification email? Send again Send again in seconds
Go Back
OK
Please try again in 10 minutes.
A verification email has been sent to your email address, please check it.
Welcome to the soundcore Collective
Here's your coupon
  • %
    Off
    Code: COPY

1. Your initial password and coupon have been sent to your email address.

2. Verify your email address for account security and credit distribution.Send again Send again in seconds

OK,Get it
Registration Failed
Sorry, your link is not working, please register again!
OK
Enter your phone number to subscribe to SMS alerts.
By subscribing, you agree to receive recurring automated promotional and personalized marketing text messages and phone calls from soundcore at the provided phone number. Consent is not a condition of any purchase. Reply HELP for help and STOP to unsubscribe. Message frequency will vary. Message and data rates may apply. View Terms & Privacy.
Mobile Number
*There seems to be something wrong.
The interface returns failure and will be skipped after 5 seconds.
Subscribe
Skip